BR half rack dimensions

BR146-HR  W286mm x D673mm x H698mm
BR148-HR  W286mm x D800mm x H698mm

BR-HR racks are provided with 19" rack punched mounting points in the side return
flanges, front & rear to allow mounting of shelves & other accessories

 
 
 
 
 
 
BR full rack dimensions

BR146 14ru   W514mm x D673mm x H698mm
BR148 14ru   W514mm x D800mm x H698mm

BR19" racks are fitted with adjustable 19" rack
rails front & back.
 
 
 
 
 
 
 
 
Basic chassis information

The BR146 & BR148 Rack Chassis is also available in a 'half rack'width . This is particularly useful for accommodating PC Towers, allowing the tower to stand next to a full 19" rack
fitted with rack mount  items that may need to be close to the PC tower for technical reasons, with cabling between the two via the side apertures. This allows the full width rack to be used for equipment with the minimum of wasted space.

 
 
In many applications 'BR' Racks are fitted under worktops & they
have a cut out in the top to allow control panels ect. to be sunk into
the worktop surface if required. When used in a 'stand-alone'  
application a separate top panel option is available which may be mounted directly onto the rack chassis or raised 20mm on spacers
to provide extra ventilation.

BR146-RTP   Raised top cover kit for BR146
BRHR-RTP    Raised top cover kit for BR14HR
BR148-RTP   Raised top cover kiit for BR148
BR22/30
 

BR-HR

Options & Accessories

BR146HR Half width Racks can be used alongside full
width BR racks to house computer towers or fitted with a
19" adaptor frame, which will allow the vertical mounting
of up to 5RU of standard 19" equipment.
This can be useful when a PC tower needs to be accommodated alongside extra drives or a breakout box
& other ancillaries that come in standard 19" chassis.

 
 
BR chassis may be fitted with tinted toughened glass doors, front
& rear. These doors are inset into the chassis frame & will  therefore
require rack strips to be inset slightly back from the face of the rack.
Glass doors are lockable but may also be securely latched shut without
need for a key.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
BR Racks may be mounted on castors (supplied as standard on all BRHS units). Castors are supplied with mounting plates to increase the load bearing capacity of the rack base.

BR-CSK4 Castor & base
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
BRM Dimensions

BRM3-250  3ru    W514mm x D250mm x H174mm
BRM3-350  3ru    W514mm x D350mm x H174mm
BRM3-500  3ru    W514mm x D500mm x H174mm
BRM4-250  4ru    W514mm x D250mm x H219mm
BRM4-350  4ru    W514mm x D350mm x H219mm
BRM4-500  4ru    W514mm x D500mm x H219mm
BRM4-600  4ru    W514mm x D600mm x H219mm
BRM6-350  6ru    W514mm x D350mm x H308mm
BRM6-500  6ru    W514mm x D500mm x H308mm
BRM6-600  6ru    W514mm x D600mm x H308mm

 
 
 
 
 
 
BRM options & accessories

BRM racks are often fitted side by side &/or under shelves & cable entry slots are therefore provided on the top & sides (as well as
underneath). When BRM racks are used in 'Stand Alone' applications
these cable entry slots can be fitted with vent grills & blanking plugs.

BRM-VTG  Top vent grill
BRM-RBP   Side blanking plug